Table Des Matières - Aqua Products SSDP37 Serie Manuel De L'utilisateur

THANK YOU FOR PURCHASING THIS AQUA PRODUCTS CLEANER.
YOUR AQUA PRODUCTS ROBOTIC CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE
EASILY INSTALLED AND TO PROVIDE LOW MAINTENANCE OPERATION. PRIOR TO INSTALLING YOUR
NEW AQUA PRODUCTS CLEANER, PLEASE DO THE FOLLOWING:
1) Register your cleaner online at fluidrausa.com/registration.
2) Record your purchase information on the spaces provided below.
3) Attach your invoice (or a copy) to this page.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required,
please contact your original dealer. If the original dealer does not perform warranty service, please visit
www.AquaProducts.com to locate an independent service company near you. If you are unable to locate a
service company, please call our Technical Support department at 1-800-822-7933.
RECORD YOUR AQUA PRODUCTS CLEANER DATA HERE:
Date of Purchase
City
Important Safety Instructions ..................... 4
Cleaner Specifications ................................ 6
General Specifications ................................................. 6
Connect to Power ...................................... 6
Install the Cleaner ...................................... 7
Submerge in the Pool ................................................... 7
Start / Stop Cleaning .................................................... 8
Optimal Patterning/Cable Tangling ............................. 8
Remove from Pool ........................................................ 9
Remove Debris ............................................................. 9
Store the Cleaner When Not in Use ........................... 10
Maintenance Tips ..................................... 11
Spare Parts .............................................. 11
Troubleshooting ....................................... 12
Purchased From
State/Province
Table of Contents
Serial Number:
(located on robot- head)
Zip/Postal Code
3