Publicité
Les langues disponibles
Les langues disponibles
TABLE OF CONTENTS
Saftey Instructions ....................... 2
Materials and Tools Needed ............ 3
Preparation ................................... 4
Mounting ..................................... 5
Installation ................................ 6-7
Cleaning and Care ......................... 7
Note: Only a professional installer should
attempt installation of the Chimney assem-
bly.
All Thermador products referred to throughout this manual are manufactured by BSH Home Appliances Corporation.
MATERIALS NEEDED
Parts Included for the Chimney Assembly:
(1) Mounting Structure Top Frame
(1) Mounting Structure Bottom Frame
(4) 1/4"x3-1/2" Lag bolts (to mount frame to wooden
structure)
(16) 10-24x3/8" Phillips head screws (to mount
frames together)
(2) Lower Covers
(2) Upper Covers
(8) Screws to mount covers together (#6 Countersink
Screws)
(4) 1/4" Nut (to mount frame to Island Hood)
(2) Top of Hood End Covers
(8) Screws (#6 Countersink Screws) (to screw end
covers to Hood)
(1) Template
(1) Conduit for ducting installation
Tools Needed for the Assembly of the
Chimney:
(1) #2 Phillipshead Screwdriver
(2) #8 x 3/8" sheetmetal screws (Screws to mount
transition to hood)
(1) Standard Tape Measure
(1) Level
(2) Ceiling mounting structure (as needed)
(1) Standard offset wrench w/ 7/16" socket
(1) Hand lift recommended (suitable for size of hood)
3
Publicité
