Fuba FMQ 508 Consignes D'utilisation page 7

Installation instructions for the
multiswitch series
FMQ 508, FMQ 512, FMQ 516
FMQ 908, FMQ 912, FMQ 916
The multiswitch series FMQ are used to distribute 4 or
8 SAT-polarities to 8, 12 or 16 users. All transmission
levels are independently available for each user,
by programming the switching method 14/18 V,
0/22 kHz and DiSEqC (9 input switches only).
Operation only with Quattro-LNB with fi xed
outputs Low V, Low H, High V, High H.
The terrestrial signals can be received without
connecting a satellite receiver. A terrestrial
amplifi er will be automatically identifi ed and
supplied with power (12 V/100 mA).
The low trough loss of the satellite signal allows the
confi guration of extensive distribution networks. The
high isolation between the SAT-polarities and the user
outputs is assuring a high signal quality for each user.
.
GB
7