Imetec C7003 Mode D'emploi page 16

Multistyler
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
EN
INSTRUCTIONS FOR USE
Slide the accessory on the
heating element (1) ensuring
the lever of the curling tongs or
straightener is facing upwards.
Turn the locking ring (2) clockwise
until its arrow (2) is aligned with
the arrow on the hand grip (4).
Connect the power cable (6) to
the mains.
Move the button 0-1 (5) onto
position 1 and let the appliance
heat up.
Proceed with styling.
When styling is completed, move the 0-1 button (5) onto
position 0 and unplug the appliance from the socket.
Wait for the heating element (1) to cool down and remove
accessories.
ATTENTION! Risk of scalding.
To extract the accessories, turn the locking ring (2) counter-
clockwise until it clicks and pull out the accessory from the
heating element (1).
Straight effect
Insert the smooth straighteners (9) into the straightener
support (8) until you hear a click.
Insert the straighteners support (8) onto the heating
element (1).
Take a thin lock of hair, not too full and as wide as the
straightener and insert it between the two straighteners.
Keep the lock of hair taut with one hand while using the
other to slide the closed straighteners from the roots to the
ends.
Wavy effect
Insert the narrow curling tong (17) onto the heating
element (1) keeping the supporting hook downwards, then
insert the brush (13) onto the accessory with the closing
hook downwards until you can hear it click.
Take a thin lock of hair and wrap it around the brush (13),
paying attention not to wrap it more than twice.
Let go of the hair after a few seconds.
Style the wave you have obtained with your hands.
14

Publicité

Table des Matières
loading

Table des Matières