Safety Tips; Product Description; Introduction - Buffalo L310 Mode D'emploi

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• DO NOT immerse the appliance in water, or use jet/pressure washers to clean it.
• DO NOT touch hot surfaces with bare hands. Always use the handles/protective gloves.
• DO NOT overfill the appliance. Keep the water level below the 'MAX' level.
• DO NOT allow the water level to drop below the 'MIN' level during operation.
• DO NOT move the appliance when it contains hot liquid.
• DO NOT use the appliance for anything other than its intended use.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
• If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.

Product Description

Model Tap
L310
L371
S007
S047
S077

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this appliance will provide the best possible performance from your BUFFALO product.
1
All manuals and user guides at all-guides.com
Pans Pots