Safety Tips - Buffalo CS950 Mode D'emploi

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT immerse the appliance in water.
• The temperature of accessible surfaces may be high
when the appliance is operating.
• The appliance are not intended to be operated by means of an
external timer or separate remote-control system.
• DO NOT obstruct or cover the appliance in any way when in
use.
• DO NOT leave the appliance unattended during operation.
• The appliance should not come into contact or be covered with
easily flammable materials, like curtains, textiles, walls and
the like. Always ensure sufficient safety distance to flammable
materials.
• Always switch off the appliance, disconnect the power supply
and allow to cool before cleaning or carrying out maintenance.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a Buffalo
agent or a recommended qualified technician in order to avoid
a hazard.
2
CS950_DB234_ML_A5_v4_20201102.indb 2 CS950_DB234_ML_A5_v4_20201102.indb 2 2020/11/2 17:04 2020/11/2 17:04