Publicité
14
TSP-AN Series
Fullrange
Screen
Logo
Lock
Sub Menu
Warning
LCD Graphic Indicator
To help the user immediately recognize that a parameter has been selected and changed from the initial
default setting, the parameter's related text on the top-level screen will invert and change to black text on a
white background. As an example, the following screenshots show how the text for the EQ function
changes when the TSP-AN default EQ setting has been changed:
This indicator function occurs only on the main DSP menu level and works for all DSP-related functions,
except for the LOAD, SAVE and SETUP sub-sections on the second page of the top-level SETUP menu.
Subwoofer
Function
ON: LCD screen saver (default)
turns on automatically after
Screen
approx. 2 minutes.
OFF: LCD turns off automatically after
approx. 5 minutes.
OFF: Deactivates front panel logo
illumination. ON: Activates front panel
Logo
logo illumination. LIMIT: Logo will light
up when the limiter is active.
Lock the device and create a password
by choosing the password characters
with the encoder and pressing to
confi rm each character. When fi nished
press the ENTER button. Unlock the
Lock
device by entering the password or
connecting the unit via USB to a PC
running proprietary remote software.
The software does not require
a password.
In case of overheating, an alert appears
Warning
on the LCD screen, and the amplifi er
will shut down until the unit cools.
Mounting and Fixing
TSP-AN full-range series cabinets are designed with multiple internal rigging points to suit many possible
mounting methods in permanent installations.
Suspending with Eyebolts
TSP-AN cabinets can be suspended using optional eyebolts coupled to the
internal rigging points provided on the top, bottom and sides and back.
The simplest method is to use the two rigging points on the top and a
single pull-back rigging point in the centre of the rear panel.
Remove the appropriate countersunk screws and replace them with
shoulder eyebolts, which must have a thread length of at least 18 mm.
Use the rear rigging point to angle the cabinet for optimum room
coverage. Cabinets may be hung upside down if required.
IMPORTANT NOTE: The mounting of a permanently installed sound system
may be dangerous unless undertaken by qualifi ed personnel with the
required experience and certifi cation to perform the necessary tasks.
Walls, fl oors or ceilings must be capable of safely and securely supporting the actual load. The mounting
accessory used must be safely and securely fi xed both to the loudspeaker and to the wall, fl oor or ceiling.
When mounting rigging components on walls, fl oors or ceilings, ensure that all fi xings and fasteners
used are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and
composition of walls and ceilings, all need to be taken into account when determining whether a
particular fi xing arrangement can be safely employed for a particular load. Cavity plugs or other specialist
fi xings, if required, must be of an appropriate type, and must be fi tted and used in accordance with the
maker's instructions.
The operation of your speaker cabinet as part of a fl own system, if installed incorrectly and improperly,
can potentially expose persons to serious health risks and even death. In addition, please ensure that
electrical, mechanical and acoustic considerations are discussed with qualifi ed and certifi ed (by local state
or national authorities) personnel prior to any installation or fl ying.
Make sure that speaker cabinets are set up and fl own by qualifi ed and certifi ed personnel only,
using dedicated equipment and original parts and components delivered with the unit. If any parts or
components are missing please contact your dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group,
including the MUSIC Group companies listed on the enclosed "Service Information Sheet", assumes no
liability for any damage or personal injury resulting from improper use, installation or operation of the
product. Regular checks must be conducted by qualifi ed personnel to ensure that the system remains in a
secure and stable condition. Make sure that, where the speaker is fl own, the area underneath the speaker is
free of human traffi c. Do not fl y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic fi eld, even if not in operation. Therefore, please keep all materials that can
be affected by such fi elds (discs, computers, monitors, etc) at a safe distance. A safe distance is usually
between 1 and 2 metres.
Quick Start Guide
15
Publicité
