Installation Instructions; Unpacking And Removing Shipping Material; Key Parts And Components; Accessories - Comfee CV10DPWBL0RC0 Manuel Du Propriétaire

Installation Instructions

Unpacking and Removing Shipping Material

Remove the packing box and lift the washer up and away from the foam base cushion.
Open the lid of washer to take out all accessories including protection foam.
Foam base cushion
Packaging materials can be dangerous to children; Keep all packaging
material (plastic bags, polystyrene, etc.) well out of children's reach. Do
WARNING
not operate this appliance on the foam base cushion. Failing to do so will
result in serious vibration.

Key Parts and Components

Top lid
Control panel
Water inlet
Drain hose
Roller
Protection foam
Frame
Cabinet
Adjustable leg
(The only one)
Top lid
Power line
Pump filter
9
Installation Instructions

Accessories

Owner's mannual Water supply hoses
Quick connection adaptor

Tools Needed in Installation

Pliers Phillip screwdriver

Key Dimensions and Specifications

Choose the Proper Location

Flooring
For best performance, you must install your washer on a solidly constructed
floor. Wood floors may need to be reinforced to minimize vibration and/or
unbalanced load situations.
- Carpeting and soft tile surfaces are contributing factors to vibration which can
cause your washer to move slightly during the spin cycle.
Do not install your washer in areas where water may freeze, since your
washer will always retain some water in its water valve, pump, and hose
WARNING
areas. Frozen water can damage the belts, the pump, hoses, and other
components. Never install on a platform or weakly supported structure.
Screws
Bottom cover
level
min 1in. min 1in.
25mm 25mm
10