How To Use; Control Panel; Washing A Load Of Laundry - Comfee CV10DPWBL0RC0 Manuel Du Propriétaire

How To Use

Control Panel

1 - Program
Press this button to select your desired washing program.
Heavy (light) Rapid
Gentle (light) Soak
Normal (light)
2 - Load Size
Press this button to set your washing load size. Your
water level throughout all steps in the cycle.
3 - Wash
Press the button to select the washing time
4 - Digital display
The digital display will show and count down the
wash cycle selected.
5 - Rinse
P ress the button to select the times of rinse
6 - Spin
Press the button to select the time of spin
7 - START/PAUSE
Press the START PAUSE button once to the start the /
Press the button during operation to pause the cycle.
continue the cycle.
(light)
(light)
setting will decide the
estimated minutes for the
wash cycle.
Press again to
17
How To Use
8 - ON/OFF
Press the ON/OFF button once to turn ON the power of
again to turn OFF the unit.

Washing a load of laundry

Step 1: Power on your washer
Press the ON/OFF button to power your wash on.
Step 2: Load your washer
Before loading your laundry, be sure to take out coins,
keys and other hard objects, and close all zippers to
WARNING
prevent the clothes from damage.
Sort laundry by fabric type, soil level, color and load size as
needed. Refer to the Fabric Care Chart in the APPENDIX.
You can fill the tub with dry, unfolded clothes ,but DO NOT
OVERLOAD the tub. Load the tub no more than 3/4 full.
To ensure good cleaning results do not overload the tub, especially when washing
heavily soiled loads. Never load the tub more than 3/4 full.
Overloading may reduce washing efficiency, cause excess wear, and possibly
cause creasing or wrinkling of items in the load.
WARNING
Note: To add a forgotten item:
1. Press the START/PAUSE button to pause the washer.
2. Wait for the tub to stop turning, then open the door.
3. Add the item, close the door, and then press the START PAUSE button. The
cycle will resume.
the washer. Press
/
18