PCWork PCW06B Mode D'emploi page 4

less than 3 seconds. The RCD-Test LED
indicator on the tester should illuminate. If the
RCD switch got triggered and all LED lights of
the tester are off, the RCD switch functions
properly. Please reset the RCD switch and
remove the tester. If the RCD switch was not
triggered, than the RCD switch does not function
properly. Please consult with a professional
electrician.
Technical Specifications:
Operating Voltage
Measurement Range
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Altitude
RCD Test
RCD Working Voltage
Safety
Cleaning
Use a dry or slightly damp cloth for cleaning,
never use chemicals or detergents. Caution:
Make sure that the device is completely dry,
before continuing to use it.
48~250V / 45~65Hz
48~250V/45~65Hz
Accuracy: ± (2.0%+2)
0°C~40°C
20%~75%RH
-10°C~50°C
20%~80%RH
≤2000m
>30mA
220V±20V
CE, CAT.II 300V
Information regarding waste disposal:
You are not permitted to dispose of this device in
household garbage. This multimeter corresponds
to the EU-directive concerning the "Waste of
Electrical and Electronic Equipment". Please
dispose of the device in your local collection
point.
Creation date of manual: March 2021 – all
technical changes reserved. No responsibility is
taken for any technical or printing errors.
Importer / Distributer:
Company Name
Address
Email
Internet
WEEE-No.
Local district court
P+C Schwick GmbH
Pohlhauser Straße 9,
42929
Wermelskirchen,
Germany
info@schwick.de
www.schwick.de
DE 73586423
Wermelskirchen,
Germany