PCWork PCW06B Mode D'emploi page 2

•
Read this manual carefully before using the
device and strictly follow the instructions
when using it. Otherwise safety for the user
cannot be guaranteed.
•
The operator of this device is obliged to
ensure that every other person using this
device has read and understood the
manual. Only qualified users are permitted
to operate the device.
•
Please be careful if the measurement
exceeds 30V AC. There is the danger of
getting an electric shock with this kind of
voltage. Since life-threatening voltage can
be tested with the device, extra care is
required and please adhere to all relevant
safety requirements. Do not measure
voltage, which exceeds the defined max.
values on the device or in this manual.
•
Always test the device's functionality on a
known circuit first. If it is not working
properly, stop using the device immediately.
•
Never use the device if the device is
damaged or the display does not work.
•
Please comply with the local and national
safety code. Wear personal protection
equipment to prevent any injury. Do not use
the instrument around explosive gas,
steam, or in an wet environment.
•
Opening, repairing, or maintenance should
only be executed by qualified professionals.
•
The RCD test can only be conducted if the
wiring of the socket is correct. Do not
conduct the RCD test with incorrect wiring.
•
Please remove any other devices from the
circuit, as they can interfere with the
results.
•
If the test results indicate incorrect wiring,
please consult with a professional.
•
Warranty and any liability in regards to
material damage or personal injury are
suspended in the following cases:
Improper usage and operation of
o
the device
Not following the instructions
o
and safety regulations provided
by the manual