Kolpin 2747 Instructions D'installation

READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO
AVOID INJURY TO YOURSELF, DAMAGE TO THE VEHICLE OR ACCESSORY.
 Torque specifications must be followed when tightening bolts. Over-tightening any and/or all screws will cause
 As specified on carton label, once protective film on shields is removed, product cannot be returned.
 As specified on carton label, damage caused by packaging staples is not covered by warranty. All staples must be
 Failure to follow these installation instructions completely may void any warrantable components and result in
 Do not use Loctite or any other similar fastener adhesive. These types of products react to plastics and cause
 Our windshields are made from the highest quality material providing optimum transparency and clarity.
Blurriness and/or extrusion marks may or may not appear when looking through windshield from a wide, side-
 The application of improper cleaners, abrasive and/or dirty cleaning towels can severely damage the product.
Failure to follow cleaning recommendation (provided herewith) may void any warrantable components.
These instructions contain important information for future reference and must be given to the customer at time of
ITEM
A
B
C
INSTRUCTION
BAG
D Mounting hardware
1. Installation
a) Find a clean flat area where you can safely lay
down the rear windshield (Item A) and the rear
bracket (Item B). Partially remove the protective
film and apply the self adhesive foam cushion
(Item C) using manual pressure to ensure good
adhesion to the windshield and cut any excess.
Self adhesive foam
cushion (+/- 41 ¾")
2747 - Instructions POLARIS RANGER MID-SIZE 2015 Rear Ws GP - rev00
IMPORTANT NOTICES
 For proper installation, TWO people are required .
cracks around mounting holes which is not covered by any warranty.
removed prior to removing product from carton.
product damage or personal injury.
cracking. Not covered by any warranty.
angle. This is normal for all extruded clear plastic materials.
purchase or upon completion of installation.
Parts List
(parts available with kit only and not available separately)
PART NAME
Rear windshield
Rear bracket
Included : 90" of 1" x ⅛" self adhesive foam cushion [end user to cut to exact length]
Foam cushion
Includes : 7 button head screws M6 x 18, 7 internal lock washers M6, 7 domed shoulder washers M6,
INSTALLATION INSTRUCTIONS
POLARIS RANGER 2015 (MID-SIZE)
REAR WINDSHIELD
PART # 2747
DEALER
DESCRIPTION
CNC windshield cut-out made of ⅛" thick GE polycarbonate or equivalent
CNC bracket cut-out made of ⅛" thick GE polycarbonate or equivalent
7 plastic shoulder washers M6 and 7 locknuts M6
Rear bracket
Self adhesive foam
cushion (+/- 45 ⅜")
Rear windshield
www.kolpin.com
QTY
1
1
1
1
1