Philips HD7826 Mode D'emploi page 14

EnglisH
14
8 To start flushing, press the 1-cup button q and
the 2-cup button qq briefly at the same time.
Never interrupt the flushing cycle halfway. If you
do, the boiler does not fill itself properly.
, The light ring around the on/off button starts
flashing to indicate that the flushing cycle has
started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
, During the flushing cycle, the boiler fills itself
with water from the water reservoir and cold
water comes out of the coffee spout. During the
flushing cycle, the machine produces more noise
than during a regular brewing cycle.
, When all the water in the water reservoir has
been used up, the flushing cycle is finished and
the machine switches off.
now your Philips sEnsEO
is ready for use.
Note: If the machine does not work, repeat steps 1-8.
Do not interrupt the flushing cycle.
Brewing sEnsEO
tips for the best sEnsEO
- Use fresh water every time.
- Use the SENSEO
specially developed by Douwe Egberts for your
SENSEO coffee machine for a full, round taste.
®
The Douwe Egberts SENSEO
stay fresh longer if you store them in an airtight
storage container.
- To make sure that the coffee always tastes
optimally, rinse the pod holders, the coffee
collector and the coffee spout regularly.
coffee machine
®
coffee
®
quality
®
coffee pods that have been
®
coffee pods
®