Publicité
Extender setup
192.168.8.1
ADMIN PANEL
1
GL-XE300-xxx
GL-XE300-xxx-Guest
Cable
No cable detected in
WAN. Please plug in an
Internet cable.
Use as LAN
Repeater
EN
Note: You may need to reconnect your client device
whenever you change the network mode of the router.
When changing the network mode, you will need to
reset the device to access the Admin Panel again.
1. Open the side menu, under More Settings browse to
Network Mode
2. Select Extender then press Next
3. Select your local network, input the password and
press Apply
192.168.8.1
ADMIN PANEL
WIRELESS
CLIENTS
UPGRADE
FIREWALL
VPN
APPLICATIONS
MORE SETTINGS
Admin Password
LAN IP
Time Zone
MAC Clone
Custom DNS Server
Button Settings
Network Mode
Revert Firmware
Advanced
IT
Nota: potrebbe essere necessario riconnettere il
dispositivo ogni volta che si cambia la modalità di rete
del router. In tal caso, sarà necessario ripristinarlo per
accedere nuovamente al Pannello di amministrazione.
1. Apri il menu laterale, in Altre impostazioni vai a
Modalità di rete
2. Seleziona Estensore quindi premi Avanti
3. Seleziona la tua rete locale, inserisci la password e
premi Applica
192.168.8.1
ADMIN PANEL
Network Mode
When you change the router's working mode,
you may need to re-connect all your client
devices.
When you use Access Point/Extender/WDS
mode, you may not connect to this UI again.
You can Press and hold the reset button for
4 seconds to revert back to router mode.
Mode Switch
Router
Access Point
Extender
WDS
Next
FR
Remarque : vous devrez peut-être reconnecter votre
appareil chaque fois que vous modifiez le mode réseau
du routeur. Si tel est le cas, vous devrez le réinitialiser
pour vous reconnecter au panneau d'administration.
1. Ouvrez le menu latéral, et dans Plus de paramètres,
accédez à Mode réseau
2. Sélectionnez Amplificateur puis appuyez sur Suivant
3. Sélectionnez votre réseau local, entrez le mot de
passe et appuyez sur Appliquer
192.168.8.1
ADMIN PANEL
Network Mode
When you change the router's working mode,
you may need to re-connect all your client
devices.
When you use Access Point/Extender/WDS
mode, you may not connect to this UI again.
You can Press and hold the reset button for
4 seconds to revert back to router mode.
Mode Switch
SSID
Home_WiFi
Password
YourPassword
Cancel
Apply
Publicité
