Sioux Tools RO2512 Serie Mode D'emploi page 4

INSTALLING SANDING DISC
•
PSA
Remove backing paper from sanding disc.
Center on backing pad and apply fi rm pressure.
•
HOOK and LOOP
Center sanding pad on backing pad and apply fi rm pressure.
REMOTE VACUUM OPERATION
Attach vacuum hose from portable dust collection system to sander's vacuum swivel.
VENTURI VACUUM OPERATION
Press end of hose onto sander's venturi vacuum adapter. Place open end of bag over other end of hose, locating strings at the fi rst
few hose ribs. Wrap strings around hose and tie securely.
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
August 1, 2005
Murphy, North Carolina, USA
Date and place of issues
WARNING
Be sure the pad is the correct size for the tool.
A mismatch between tool and pad will cause excessive vibration.
SOUND AND VIBRATION READINGS
*Sound Pressure
Catalog No. dBA
RO2512-50SNP 74.9
RO2512-60SNP 75.3
*per PN8NTC1
DECLARATION OF CONFORMITY
EN 792, EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Mark S. Pezzoni
Power and Specialty Tools
Name and position of issuer
*Sound Power
dBA
86.5
86.9
*per PN8NTC1 *per ISO 8662
RO2512 Series
President
4
*Vibration
m/s
2
2.1
2.3
Signature of issuer