Scotts LCS31662S Manuel De L'utilisateur page 14

Problem
- Unit does not run
Bar and chain running hot
-
and smoking
- Motor runs but chain is not
rotating
- Motor stops while switch
trigger is depressed
at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,
TROUBLESHOOTING
Possible Cause
- Battery not making contact
- Lock off button not fully operated
- Battery not installed properly
- Battery not charged
- Check tension for over-tight
condition
- Chain oil tank empty
- Chain installed backwards
Chain tension too tight
-
- Check guide bar and chain for
damage
- Motor is overloaded
CALL US FIRST !!
Call us first with questions about operating or maintaining your product
or get assistance on scotts.americanlawnmower.com.
-Check battery is fully inserted
-Check that lock off button is fully forward prior to
moving trigger
-Check battery installation
-Check battery charging requirements
- Adjust chain tension
- Fill tank with chain oil
- Reverse chain so that cutters face the right
direction
- Adjust chain tension
- Replace damaged bar and chain with identical
replacement parts.
- Release switch trigger, wait several seconds,
then depress trigger again.Motor should restart.
If it doesn't, remove battery pack, reinstall
battery pack, then try again.
14
Model LCS31662S
Possible Solution