hifold HF02C Serie Manuel page 25

•
Secure Seat Back Cover onto
Seat Back Sides by hooking
top edge of cover over top of
Seat Back Side 1
pulling the front end over
the front of the Seat Back
Side 2 and sliding the fabric
into the slot between the
seat foam and the plastic
on front and top of Seat Side.
•
Ensure all foam is covered
and black edging is tucked
between foam and plastic.
Assembly of Headrest Cover:
•
Secure center section first
by hooking lower edge of the
center section of the Headrest
Cover over the bottom of the
foam at the center of the
Headrest and then pull top
1
edge of the cover up and over
the top of the foam
slide the fabric into the slot
between the seat foam and
the plastic at the center of
the Headrest.
Additional Information
and then
2 and then
•
Next, hook the bottom edge
1
of the cover over the foam
on the bottom edge of the
Headrest side and then pull
2
top edge of the cover up and
over the top of the foam,
sliding the fabric into the slot
between the seat foam and
the plastic.
•
Ensure all foam is covered
and black edging is tucked
between foam and plastic.
2
1
24
2
1
EN