hifold HF02C Serie Manuel page 11

b. Unfold Headrest - Rotate
Headrest up until Headrest
locks into use position.
c. Unfold Seat Back and
Headrest - Rotate Seat
Back up until it locks into
position.
CAUTION: Avoid pinch when
moving Seat Back.
Keep fingers clear
of hinge.
d. Seat Back Sides - Grasp
both Seat Back Sides and
rotate them out into the
open and locked position.
CAUTION: Avoid pinch when
moving Seat Back.
Keep fingers clear
of hinge.
Preparing for Use
2
Adjust the hifold Booster to the maximum
.
height and maximum width as described below.
a. Place the unfolded hifold Booster on a
vehicle seat with the back of the booster seat
contacting the vehicle seat back or place in a
chair that supports the Seat Bottom and also
the Seat Back and Headrest.
b. Seat Bottom Sides/Lap
Belt Guides - Seat Bottom
Sides/Lap Belt Guides have
three width adjustment
positions, adjust them to
the maximum width by
pulling the Seat Bottom Side Lock
on underside of Seat Bottom forward
and sliding the Seat Bottom Sides
c. Seat Back Sides - Seat
Back Sides have three
width adjustment positions,
adjust them to the maximim
width by depressing the
lock on seat Back Side
Adjustment Knob
rotate knob
counterclockwise
move Seat Back Sides out.
10
1
2 2
1
out.
2
2
1
and
1
2
to
EN