hifold HF02C Serie Manuel page 24

To reinstall seat covers after cleaning:
Note: It is best to install the Seat Bottom Cover
first, then the Seat Back Cover and then
the Headrest Cover.
Assembly of Seat Bottom Cover:
•
Secure center section first by
hooking (2) elastic loops on
plastic hooks located where
Seat Bottom meets Seat Back,
then wrap tabs on Seat
Bottom Cover around plastic
hooks. Hook (2) loops around
"pegs" and lay back pad
against Seat Back.
•
Secure front edge of Seat
Bottom Cover by starting
on one side and insert the
edge of the pad into the slot
between the seat foam and
plastic.
Additional Information
•
Secure Seat Bottom Side
Cover to both Seat Bottom
Sides by hooking the front
end over the front of the
seat side
fabric into the slot between
the seat foam and the plastic
from front to back
•
Ensure all foam is covered
and black edging is tucked
between foam and plastic.
Assembly of Seat Back Cover:
•
Secure center section first
by hooking (4) elastic loops
on one side, from top to
bottom, and then hook the
(4) elastic loops on the other
side.
Note: Cover should be on
23
1
and sliding the
.
2
top of the back pad
that is part of the
Seat Bottom Cover.
2
1
EN