Publicité
Checking proper mounting using an integrated status display
The integrated status display permits both a qualifi ed judgment of the incremental signals as well as a check of the reference mark signal.
The quality of the incremental signals is indicated by shades of color as well as the blinking of the LED.
This makes a very detailed gradation of signal quality possible. The reference mark signal's compliance to tolerances is shown by a pass/fail display.
Note
The status display of the reference mark signal is switched off at velocities over approx. 150 mm/s in order to prevent permanent blinking.
The information on the incremental signals would otherwise no longer be displayed.
The reference mark signal display is not activated until the power supply is switched back on.
10
Publicité
