BabyGo TravelXP Manuel D'instructions page 10

BabyGO
Dear Parents:
Congratulations on the purchase of our safety baby car seat. Safety, comfort and user-friendliness
played an important role in our car seat, and our products are qualifi ed by the ECE which is the highest
standard. Your child's safety can only be guaranteed if this product is used according to these instruc-
tions. Therefore, please take time to read through this manual carefully.
Important : Read fi rst
• This product is suitable for children from birth to approximalely 12 months (0 – 13kgs).
• Read this instruction manual carefully. Study the illustrations in this manual closely before and du-
• It is a safety product that is only safe when used according to the instructions given in this manual.
• To prevent your child from falling out of the seat. Always check to make sure the carrying handle is
• The correct rooting of the seat belt along the blue markings on the product is essential for your
• Never use this product on a seat equipped with a front airbag.
• When installing with the seat belt, only use the car seat on forward facing seat that has been provi-
• It may be used in the front seat and in the back seat. We strongly suggest to be used in the back seat.
• Always secure your child with the harness belt. Even when the seat is not fi tted in the car.
• The seat may become unsafe after an accident due to damage that is not immediately noticeable. It
• We strongly advise against using a second-hand product, as you can never be sure of its history.
• In order to prevent damage to the cover, do not remove the logos or airbag sticker.
Instruction for use in the car
• Always check to make sure the seat fi ts in your car properly before purchasing it.
• The baby car seat must always be secured. Even when it not in use. An unsecured seat can injure
• If the car seat belt height is adjustable, adjust it to lower position.
• When installing the baby car seat on the passenger seat, put the car seat in the rearmost position.
• Always cover the seat when the car is parked in the sun, as the plastic and metal parts can become
10
BabyGO • www.babygo.eu
ring installation.
"clicked" into carrying positions before lifting the seat. Also make sure your child is always strapped
securely with the harness belt.
child's safety . Please see the installation section. Never thread the belt in any other way.
ded with an automatic or static 3--point belt. The belt provided has been approved according to the
ECE R16 standard or similar.
Always place the product rearward facing .
should therefore be replaced.
other passengers in the car in the event of an emergency stop.
The backrest must be in fully upright and headrest down. When not using it, the passenger seat (and
headrest) may be adjusted as required.
very hot and cover may become discolored.
Baby car seat
TravelXP