Crosley W10338613B Guide D'utilisation Et D'entretien page 15

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
If you experience
Washer not performing as expected (cont.)
Sand, pet hair, lint, etc.
on load after washing
Load is tangling
Not cleaning or
removing stains
Incorrect dispenser
operation
to possibly avoid the cost of a service call.
Possible Causes
Heavy sand, pet hair, lint, and
detergent or bleach residues
may require additional rinsing.
Washer not loaded as recommended.
Wash load not completely
covered in water.
Added more water to washer.
Washer not loaded as recommended.
Adding detergent on top of load.
Not washing like colors together.
Not using HE detergent or using too
much HE detergent.
Not using correct cycle for fabric type.
Not using dispenser or Downy Ball
Not selecting Fabric Softener – On.
Clogged dispenser.
Add an Extra Rinse to the selected cycle.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed;
however, items will be wetter than those using a higher
speed spin. See the "Cycle Guide" to match your load with the
best cycle.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Washer senses load size and adds correct amount of water.
This is normal and necessary for clothes to move.
Added water lifts the laundry off the washplate, resulting in less
effective cleaning.
Washer is less efficient at cleaning when tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Add only 1 or 2 garments after washer has started.
Add detergent, oxi products, and color-safe bleach to the
bottom of the basket before adding the load items.
Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
The suds from regular detergent can keep washer from
operating correctly.
Use only HE detergent. Be sure to measure correctly.
Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Super Wash and Heavy cycle for tough cleaning. See the
"Cycle Guide" to match your load with the best cycle.
.
Use dispenser for chlorine bleach and Downy Ball
®
softener to avoid staining.
Load dispenser before starting a cycle.
Do not add products directly onto load.
Always select "On", when selecting Fabric Softener option.
Cycles that use spray rinsing will add additional water for proper
fabric softener dispensing when "On" is selected.
Use only liquid chlorine bleach in the bleach dispenser.
Solution
for fabric
®
15

Publicité

Table des Matières
loading

Table des Matières