D-Link DAP-1360 Guide D'installation page 5

All manuals and user guides at all-guides.com
PRODUCT
SETUP
CD SETUP WIZARD
English
ADVANCED SETUP (ACCESS VIA IP ADDRESS)
To configure DAP-1360 manually (without the set-up CD) connect your computer to the DAP-1360
using the ethernet cable provided. Then connect the power cable on the DAP-1360. The power
light will display as solid green.
Then simply open a browser window and enter the IP address in the browser address field:
If you have more than one Access Point, enter http://dlinkapxxxx (the xxxx are the last four digits
of the AP's MAC address which is located on the bottom of the device in the label).
DAP-1360
SETUP WIZARD CD
The CD contains all of the instructions required to setup DAP-1360
INSERT CD
Insert the CD into the CD drive of your computer. The setup
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DAP-1360 yet)
SETUP WIZARD
Select your language from the list of options and follow the
steps within the wizard to complete the setup of DAP-1360
IP ADDRESS: http://dlinkap or http://192.168.0.50
USERNAME: Admin
PASSWORD:
5