Hilti SF 8M-A22 Mode D'emploi page 22

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
▶ Use only Hilti lithium­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Li-ion battery state of charge display
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge state of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes, the power tool is in working order.
1 LED flashes, the power tool is not in working or-
der.
4 LEDs flash, the power tool is not in working or-
der.
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
Follow the instructions in the "Troubleshooting" section.
3.4 Items supplied
Drill / driver, side handle, hook wrench, operating instructions
18 English
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
Side handle
Keyless chuck
Torque setting ring
Gear selector switch
Forward/reverse switch with switch-on inter-
lock
Control switch (with electronic speed control)
Grip
Light to illuminate the work area
Belt hook (optional)
Li­ion battery
Hook wrench
Battery release button
Battery charge-status and fault indicator
2065390
*2065390*