Wellis Coyote Guide D'utilisation page 9

Step 2
1. Use 2 pcs Philips thumb head screw (Part # 38) to install Kick panel plate
(Part # 17) to Part # 21;
2. Use 3 pcs ¼" flat Philip's screw head (Part # 37) to connect left side panel
(Part # 10) to Part # 21;
3. Use 3 pcs Part # 37 to connect right side panel (Part # 25) to Part # 21;
4. Use 8 pcs Part # 37 to connect back panel (Part # 26) to Part #21, # 10
and #25;
5. Make sure all the connections are smooth, Do not over-tighten all the
screws until parts are lined up