Wellis Coyote Guide D'utilisation page 14

Step 7
EN
1. Use 1 pc ¼" nut (Part # 40) and 1 pc ¼" flat gasket (Part # 43) to
connect chimney coping (Part # 1) to chimney supporting rod (Part
# 2)
2. Install Part # 1 and # 2 to the top of Chimney Pipe Assembly (Part
# 3);
3. Use 4 pcs ¼" flat Philip's screw head (Part # 37) to connect Part #
3 to Pizza Oven Cavity (Part # 4)