How To Use The Flashlight - Westinghouse iGen600s Mode D'emploi

can be obtained by consulting the smart device manufacturer�
12V 6MM OUTPUT: The device comes with a 12V 6mm port� This can
output 12V DC, up to 8A� If you plan on using the 6mm outlet without
adapter please confirm whether your DC 12V appliance supports
charging with a 6mm DC plug (The diameter of the DC port of the
product is 6 mm)�
PROTECTION MODE: Short-circuit/Overload Protection: If the AC or
DC output is short-circuited or overloaded (- Load(s) power output is
greater than 300W), the unit will shut down power output to protect
itself� Some devices, such as refrigerator, ice maker or a laser printer
may require a surge power, the surge power could exceed 600W or
even higher, this could cause overload protection with this unit� Please
remove the devices and consult with the device manufacturers for more
information�

HOW TO USE THE FLASHLIGHT

1. Press Flashlight ON/OFF button once to turn light on
2. Press button again to make light 50% brightness
3. Press a third time to turn light off
SOS MODE: While the light is on, hold down flashlight button for 3
seconds to activate SOS mode� Single press to turn SOS mode off�
WARNING: Do not look directly into the light� May cause damage
due to the strong light�
Westinghouse Outdoor Power Equipment - 13