Pure Sine Wave; How To Power Ac Appliances - Westinghouse iGen600s Mode D'emploi

PURE SINE WAVE

The output voltage of a sine-wave inverter has a sine wave-form like the
sine wave-form of the mains/utility voltage� In a sine wave, the voltage
rises and falls smoothly with a smoothly changing phase angle and also
changes its polarity instantly when it crosses 0 Volts�
The unit provides Pure Sine Wave output and can be compatible with AC
electric appliance that works with Sinusoidal waveform (power≤300W).
Appliances that use an AC motor are going to work to full capacity on a
pure sine wave, such as an electrical fan� Appliances like refrigerators,
microwaves, and compressors that use AC motors and some delicate
equipment will be better use with our pure sine wave inverter�

HOW TO POWER AC APPLIANCES

1. Make sure the appliance you are plugging in is turned off�
2. Connect the power cable plug of the electrical appliance to the AC
outlet of the product�
3. Press the "AC Power ON/OFF" button to turn on� The button will
illuminate when it is on�
4. Turn AC appliance on� The LED Display will display real-time wattage
of the appliance�
5. When finished, turn off device, remove power cable and press "AC
Power ON/OFF" to turn outlets off� (If you leave the AC Power button
on it will drain the battery�)
NOTICE: If the total output exceeds 300W, the power station will
automatically shut off� Please ensure the power consumption is less
than 300W, then press the AC Power button�
WARNING: The AC outlets, AC voltage, and frequency are different
according to different countries; please carefully check whether the
product specifications are consistent with the appliance specifications
before use, otherwise, it can lead to dangerous situations�
Westinghouse Outdoor Power Equipment - 11