Videotec ODBH18K1 Manuel D'instructions page 6

Fig. 4
Wire up the fan by inserting the connector into
the corresponding socket on the FAN board.
Use the straps to secure the cable to the
ring and so that it does not get in the way
of the camera and related adapter.
Fig. 5
Repeat the same operations to install
the second additional heater.
Before proceeding, remove the
h
FAN board. At the end of the
operation, re-place the board.
4 • MNVKDBH18H_0804_EN
7 Disposal of waste
materials
This symbol mark and recycle system
n
are applied only to EU countries
and not applied to the countries
in the other area of the world.
Your product is designed and manufactured
with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed
of separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
8 Technical data
8.1 Part number
ODBH18K1 Reinforced fan-assisted heater
115/230Vac
ODBH18K2 Reinforced fan-assisted heater
12Vdc/24Vac
8.2 Package
Unit Weight:
ODBH18K1 0.1kg / 0.2lb
ODBH18K2
0.2kg / 0.4lb
Package Weight:
ODBH18K1 0.15kg / 0.33lb
ODBH18K2
0.15kg / 0.33lb
Package Dimension (BxHxL):
ODBH18K1 8.5x11.5x5.5 / 0.4x0.5x0.3in
ODBH18K2 8.5x11.5x5.5 / 0.4x0.5x0.3in