Installation - Andrews Sykes Polar Wind PLUS Manuel D'instructions

Location:
1) First, choose a window that opens outdoors – this is important so that the hot exhaust air
from the air conditioner is dissipated efficiently away from the room.
2) The air conditioner must only be used on a flat, stable surface.
3) The air conditioner must not be used in the bathroom, laundry, kitchen or other places where
water or other liquids could splash onto it.
4) Do not install in a location where the air conditioner will be exposed to a source of heat.
5) During use,the air conditioner should have a gap of 50cm on all sides, for sufficient ventilation.
Attaching the Exhaust Hose:
1. Twist the two Hose Connectors onto the two ends of the Exhaust Hose.
2. Slide the square Hose Connector into the slots over the openings at the rear of the air
conditioner; the other (free) end will be connected once the Window Kit is installed.
- -

Installation

3