Steinbach Active Balls 50 Notice Originale page 37
Masquer les pouces
Voir aussi pour Active Balls 50:
- Mode d'emploi (49 pages) ,
- Notice originale (407 pages) ,
- Notice originale (32 pages)
Publicité
Les langues disponibles
Les langues disponibles
Problem
The pump is not getting enough
water or the system pressure is too
low.
The pump does not start up.
If the problem cannot be solved, contact the customer service listed on the last page.
Technical data
Active Balls 50
Model:
Active Balls 50
Item number:
040220
Vessel volume:
Ø 415 mm / approx. 50 l
Connection diameter:
Ø 32/38 mm
Design:
- - - - -
Circulation rate:
max. 5,500 l/h (24.2 GPM) Battery for timer:
Pool volume (water
max. 22,000 l (10,000 gal) Prefilter:
content):
Water temperature:
max. 35 °C (95 °F)
Requirements on filter
medium:
Steinbach filter balls:
approx. 545 g
Quartz filter sand:
- - - - -
Active Balls 75
Model:
Active Balls 75
Item number:
040120
Vessel volume:
Ø 415 mm / approx. 75 l
Connection diameter:
Ø 32/38 mm
Design:
- - - - -
Circulation rate:
max. 6,500 l/h (28.6 GPM) Battery for timer:
Pool volume (water
max. 33,000 l (8700 gal)
content):
Water temperature:
max. 35 °C (95 °F)
Requirements on filter
medium:
Steinbach filter balls:
approx. 1150 g
Quartz filter sand:
- - - - -
Possible cause
The water level in the pool is too
low.
The prefilter basket (if present)
is clogged.
The suction line is clogged.
The pump has no power.
The pump is defective.
Pump model:
Pump item number:
Pump installation:
Pump function principle:
Pump timer:
Power supply:
Output:
Flow rate:
Delivery head:
Pump model:
Pump item number:
Pump installation:
Pump function principle:
Pump timer:
Prefilter:
Power supply:
Output:
Flow rate:
Delivery head:
Remedy
Raise the water level in the pool.
Empty the prefilter basket.
Clean the pressure line.
Connect the pump's power plug to the
power supply. Check whether the fuse
has tripped.
Contact customer service.
SPS 50-1T
040949
on base plate
self-priming
integrated timer
button cell CR2032;
Lithium 3V
available
220-240 V~, 50 Hz
max. 250 W
max. 7,000 l/h (30.9 GPM)
max. 7.5 m (24.6 ft.)
SPS 75-1T
040916
on base plate
self-priming
integrated timer
button cell CR2032;
Lithium 3V
available
220-240 V~, 50 Hz
max. 450 W
max. 8,500 l/h (36.3 GPM)
max. 9.0 m (29.5 ft.)
37
Publicité
