Installing Sd Cards; Removing An Sd Card - Fujitsu T732 Guide D'utilisation

Installing SD Cards

SD Cards are installed in the SD Card slot. To install an SD Card, follow these steps
I
NSTALLING OR REMOVING AN
LIFEBOOK T
YOUR
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD
LIFEBOOK T
YOUR
See your specific card manual for instructions on the installation of your card. Some cards may require that your
1
Tablet PC is off while installing them.
Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
2
Insert your card into the slot with the product label facing up.
3
Push the card firmly into the slot until it is seated in the connector.
4

Removing an SD Card

To remove an SD Card, follow these easy steps:
S
EE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD
S
TO BE IN LEEP
Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop].
1
Push the SD Card in until it unlatches. It will then eject from the slot for removal.
2
SD C
ARD DURING YOUR
PC.
ABLET
PC, .
ABLET OR BOTH
M O
ODE OR FF WHILE REMOVING THEM
LIFEBOOK T PC'
ABLET S SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND
.
75 - Secure Digital Cards
:
. S
OME CARDS MAY REQUIRE YOUR
/
OR
,
LIFEBOOK T PC
ABLET