Using The System As A Tablet - Fujitsu T732 Guide D'utilisation

Using the System as a Tablet

If you would like to use the system as a tablet, perform the following step
T
•
HE DISPLAY CAN BE ROTATED IN EITHER DIRECTION
ORIGINAL POSITION
COULD CAUSE HINGE DAMAGE
IT IN THE WRONG DIRECTION
I
•
N THE FOLLOWING STEP
COULD GET SCRATCHED
I
•
T IS IMPORTANT TO NOTE THAT NO MATTER WHICH MODE YOUR TABLET IS IN
.
TO IT
Lift the display until it is perpendicular to the keyboard. (Figure 9).
1
When the display is perpendicular to the keyboard, rotate it 180 degrees in either direction (Figure 10) so that it
2
is facing backwards.
Holding the top edge of the display panel, pull it forward until it is lying atop the keyboard.
3
To return the system to notebook configuration:
Lift the display until it is perpendicular to the keyboard.
1
When the display is perpendicular to the keyboard, rotate it 180 degrees in either direction so that it is facing
2
forward.
,
BUT WHEN RETURNING THE SYSTEM TO NOTEBOOK MODE
( . .,
I E THE REVERSE OF HOW YOU TURNED IT WHEN YOU OPENED IT
. T
HE SCREEN SHOULD ROTATE EASILY
.
,
BE SURE TO POSITION THE DISPLAY PERPENDICULAR TO THE KEYBOARD
.
33 - Display Panel
s.
. T
URNING THE DISPLAY IN THE INCORRECT DIRECTION
; ,
IF IT DOES NOT ROTATE EASILY YOU ARE PROBABLY ATTEMPTING TO TURN
,
OTHERWISE THE KEYBOARD OR DISPLAY COVER
,
THE LATCH SHOULD ALWAYS BE ENGAGED TO PREVENT DAMAGE
,
BE SURE TO TURN IT BACK TO ITS