NewAge Products Pro 3.0 Serie Mode D'emploi page 16

Fastening Cabinets
Parts Needed.
Hex Bolt
(1/4 x 5/8")
Washer
Lock Nut
(1/4")
(1/4")
Note:
Remove all drawers before
fastening cabinets.
Bolt each subsequent
cabinet to the previous
one using the supplied ¼"
x 5/8" hex bolts and lock
nuts provided in each base
and wall cabinet.
WARNING: Wall backets are not designed to support the weight of a loaded cabinet.
Cabinets must be secured to the wall using supplied 1/4" x 2.5" lag screws.
2
Level cabinets and tighten all bolts.
16
1
Align bolts, tighten lightly.
Note:
Fasten additional cabinets to
initial securely mounted cabinet.
4 X EACH
CABINET