human care Carl Oskar Manuel De Maintenance page 5

Maintenance, inspection and testing
Height adjustment
Control function.
CE-marking
Ensure that the CE-marking is present
and legible.
Reflectors
Ensure that the reflectors are still there
and visible.
Folding mechanism
Control function
Wheels
Ensure the wheels are not worn out and
spin easily to ensure proper movement
of the rollator. If any noise is heard, have
an authorized agent inspect product.
Front forks
Make sure that the ball bearings are
firmly attached and that the forks swing
easily. Test by swinging both wheels at
a minimum of three times and up to ten
times. There should be no more than
two swings difference between the two
Authorized Dealer/Service Agent
Last Service Date
www.humancaregroup.com
wheels while they swing between 3 and
9 o'clock. Adjust the inertia by replacing
and adjusting the fork screws M12x56, .
Seat
Periodically check to ensure that the
seat mechanism and screws are firmly
in place. If any components are not
secure, do not sit on the rollator and
have it inspected for repair immediately.
If used, ensure the seat pad is properly
mounted in the seat place for maximum
comfort.
Stability
The wheels should all rest firmly on the
ground and that there should be no
distortion of the frame.
Walking Test
Before using your rollator, take a small
walk with it to ensure it is properly
functioning.
ENG
5