Philips HP3643 Mode D'emploi page 8

ENGLISH
8
Using the appliance
Relevant knowledge - The utilization of an infrared heater
The infrared heater produces infrared light, which penetrates deeply into the skin and warms the
tissues. The warmth modulates the neuronal signals to the brain and thus reduces pain. Warmth also
stimulates the blood circulation and dilates the blood vessels, which accelerates the transport of
substances necessary to rebuild and nourish the body's tissues. Furthermore, infrared light speeds up
the metabolic process and the removal of waste substances from the body. Because it makes tissue
more pliable, warmth also reduces stiffness and makes joints more flexible.
Because of these effects, use of the infrared heater can alleviate pain due to muscle and joint problems.
Possible applications:
- Alleviation of occasional or chronic muscle pains, stiff muscles and stiff joints.
- Alleviation of lower-back ache.
- Preparation for a massage
Preparing to use the infrared heater
1 Place the pedestal on a stable, level surface (Fig. 5).
2 Insert the pedestal tube into the pedestal until it locks into place (Fig. 6).
Note: There is only one way to attach the tube to the pedestal.
3 Attach the lamp housing to the top of the pedestal tube (Fig. 7).
To make sure all parts are properly assembled, check if the spring-loaded lock buttons are visible
in the holes. (See figure 1).
4 Make sure there is at least 35cm free space around the appliance to prevent overheating
(Fig. 8).
Thanks to the pedestal, you can use the appliance in many different positions. Below you find some
examples.
- To heat your back from shoulders to hips, place the appliance beside a bed, with the lamp
housing in highest position and tilted down. Lie down comfortably on your belly (Fig. 9).
- To heat your back, place the appliance beside a bed, with the lamp housing in lowest position.
Lie down comfortably on one side (Fig. 10).
- To heat your upper back and shoulders, place the appliance behind a chair or other seat, with
the lamp housing in horizontal position. Sit down comfortably with your back towards the appliance
(Fig. 11).
- To heat your back, place the appliance beside a chair or stool, with the lamp housing in vertical
position. Sit down comfortably with your back towards the appliance (Fig. 12).
Tip: Small persons who want to heat their lower back while sitting on a chair can put their feet on a low
footstool for more comfort.
Tip: Tall persons who want to heat their lower back can lie down on a bed with their back towards
the appliance.
- To heat your hip and upper leg, place the appliance beside a chair, with the lamp housing in
horizontal position. Sit down comfortably on a chair or stool (Fig. 13).
5 Adjust the lamp housing.
To avoid getting your fingers stuck when you adjust the height, hold the lamp housing by one of
the handgrips or by the hinge as long as the height adjustment rings are unlocked.
Note: The pedestal tube consists of three parts and two height adjustment rings. You can adjust the
height with both rings.