Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
1
Install the plastic hose with window bracket adapter and hose connector on both sides.
Ensure proper fit on both ends.
2
Adjust the window bracket as per width or height of your window and insert the plastic
pins to fix at the desired position.
3
Connect the plastic hose to the hose connector on the back of the unit. Push-in then rotate
clockwise.
7
Plastic Pin
Plastic Pin
=
Note : Do not install the window
bracket to your window. This step is
required only to adjust it to the
size of your window. The bracket
should be removed from the window
after the size is adjusted.
Publicité
Chapitres
Table des Matières
Dépannage
