Publicité
Les langues disponibles
Les langues disponibles
Operating
When using AC power source
1. Insert the battery lead to the right battery connector.
Note:
Please make sure insert the battery polarities correctly.
2. Select the battery type(LiPo/LiHV) by rotating the dial
and press the dial once to confirm the battery type.
LiPo Battery
LiHV Battery
3. Select the charging current (0.05-1.2A) by rotating the dial.
Note: You are not able to adjust the charging current during charging process.
Charging Current(A)
Charging Current(A)
4. Press and hold the dial for 3 seconds to start charging process.
The related status LED will turn red with long beep.
5. During the charging process, the 4 digital LED will display battery voltage, charging current and charging capacity.
Battery Voltage
Charging Current(A)
Voltage of
Voltage of
LiPo Battery
LiHV Battery
6. The LED will stay red during the whole charging process.
7. Press and hold the dial for 3 seconds during charging process to stop charging. The LED will turn off.
8. When the charging process is finished, the status LED turn green and blinks 5 times with
audible sound. And the status LED stays green and the 4-digital LED will display "FULL".
9. Remove battery from the charger. Please wait 30 seconds and 4 digital LED will display "LIPO",
the charger is ready for another charging process.
Press the dial
once to confirm
the battery type
Press and hold
the dial for 3
seconds
Charging Capacity(mAh)
Charging
Charging
Current
Capacity
Guarantee / Liability Exclusion
The company MULTIPLEX Modellsport GmbH & Co.KG accepts no liability of any kind for loss, damage or
costs which are due to the incorrect use and operation of this product, or which are connected with such
operation in any way. Unless the law expressly states otherwise, the liability on the part of MULTI¬PLEX
Modellsport GmbH & Co.KG to pay damages, regardless of the legal argument employed, is limited to the
invoice value of those products supplied by MULTIPLEX Modellsport GmbH & Co.KG which were directly
involved in the event in which the damage occurred. This does not apply if liability is incurred according to
statutory law on account of intentional or gross negligence.
We guarantee our products in accordance with the currently valid statutory regulations. If you wish to make
a claim under guarantee, your initial course of action should always be to contact the dealer from whom you
purchased the equipment.
The guarantee does not cover faults and malfunctions which are caused by the following:
· Incorrect or incompetent use
· Maintenance carried out incorrectly, belatedly or not at all, or not carried out by an authorised Service Centre
· Incorrect connections
· The use of accessories other than genuine MULTIPLEX items
· Modifications or repairs which were not carried out by MULTIPLEX or by an authorised MULTIPLEX Service Centre
· Accidental or intentional damage
· Defects due to normal wear and tear
· Operation of the unit outside the limits stated in the Specification
Disposal
This symbol means that it is essential to dispose of electrical and electronic equipment separately
from the domestic refuse when it reaches the end of its useful life. Take your unwanted equip-
ment to your local communal collection point or recycling centre. This applies to all countries of
the European Union, and to other European countries with separate waste collection systems.
CE Conformity Declaration
This device has been assessed and approved in accordance with European harmonised directi-
ves. This means that you possess a product whose design and construction fulfil the protective
aims of the European Community designed to ensure the safe operation of equipment.
If required, you can request MULTIPLEX Modellsport GmbH & Co.KG to supply a copy of the unit's
Conformity Declaration. Please contact the company using the contact details at the foot of the page.
Errors and omissions excepted. Technical modifications reserved.
Copyright Multiplex Modellsport 2015
Duplication and copying of the text, in whole or in part, is only permitted with the
prior written approval of Multiplex Modellsport GmbH & Co.KG
MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestr. 1
75015 Bretten · Germany
Multiplex Service: +49 (0) 7252 - 5 80 93 0
www.multiplex-rc.de
Publicité
