Alternative Hanging Of A Door (Solid Or Glass) - Klimawatt Eurocave Compact 59 Série Mode D'emploi

1II. Alternative hanging of a door (solid or glass)
x3
A B
You can change which way it opens. Proceed as follows (example for
changing a right hand door to a left hand door):
4
1
Loosen the three screws using the Torx "T25" tool.
2
Remove the upper hinge.
3
Remove the grommets gently using a fine blade.
4
Lift the door from the lower hinge by opening the door slightly and
then lifting it.
6
5
Loosen the door pivot guide.
6
Remove the grommets gently using a fine blade and in its place fit the
pin. Relocate the grommet on the opposite side.
7
7
Loosen the four screws.
8
Locate the foot on the other side of the housing using the screws.
- I
4
NSTALLING YOUR WINE CABINET
x3 x6 x2
C D E F
1
2
3
8
A
B
C
G H J
D
E
F
9
Turn the door 180°.
Warning: the glazed doors are very heavy. Take all necessary
precautions not to injure yourself or drop the door.
10
Replace the door on its pivot guide.
5
11
Relocate the upper hinge.
12
Relocate the hinge in such a way so that the door is parallel with the
case. Check (by closing the door) that the seal adheres well to the
housing and is leak proof.
13
Replace the grommets.
G
Upper hinge Lower hinge
H
Grommets Door pivot guide
J
Grommets Door axis plug
Torx screw
Torx screw
Closing clip
13
12
11
9
31
EN