Publicité
Les langues disponibles
Les langues disponibles
5
Putting into operation
Danger of electrocution!
Ensure that the control unit is only installed and put into opera-
tion by specially-trained authorised personnel.
Danger
-
Remove the top cover of the control unit.
-
Set the switches.
-
Ensure that both rows of switches are set identically.
-
Close the top cover of the control unit.
-
Ensure that all sensors are energized.
-
Apply operating voltage.
With the operating voltage applied:
The operating voltage LED is on.
LEDs 3, 4 and 5 are flashing.
The control unit will perform an internal self-test.
After successful completion of the test:
The control unit switches through the safety output and the control output.
The operational standby LED is lit.
The control unit is ready for operation.
900565 / 04.04.2016
All manuals and user guides at all-guides.com
GB
25
Publicité
