Publicité
Les langues disponibles
Les langues disponibles
inSTALLATiOn
Safety
inSTALLATiOn
6. Safety
Only qualified contractors should carry out installation, com-
missioning, maintenance and repairs.
6.1 General safety instructions
We guarantee trouble-free function and operational reliability
only if original accessories and spare parts intended for the
product are used.
6.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regula-
tions and instructions.
7. Product description
Standard delivery
The following are delivered with the product:
- Filter cassette M5
- 2 Filter frame
- 2 star grip screws for securing the cover
Accessories
- insulation mats ZLWF FBF 160 iSO
8. Preparation
8.1 Installation location
ensure that there is sufficient space for changing filters and
cleaning the filter box.
10 |
9. Installation
Material losses
We recommend not fitting the filter box with the cover
facing downwards.
Locking tabs should prevent the filter frames from
slipping out. The pressure from contact with the filter
should hold the filter frame in place below the locking
tabs. With thin filters or if a filter frame is inserted in
the filter box without a filter, the filter frames may fall
out when the cover is removed.
if you can only fit the filter box with the cover facing
downwards, you must stop the filter frames from fall-
ing out when removing the cover.
if you fit the filter box with the cover facing down-
wards, do not use fleece filters. These filters are thin.
The filter frame would fall out.
Note
Pay attention to the air flow direction indicated on the
product.
f undo the star grip screw by hand.
f Remove the cover.
1 direction of flow
f When fitting the filter box, observe the direction of flow.
f Connect the air ducts tightly (airtight) to the filter box.
1
LWF FBF 160
Publicité
