Assembly & Set-Up - Cub Cadet CC 3024H Manuel

Assembly & Set-Up
Contents of Carton
• One Pressure Washer
• One Pressure Washer Operator's Manual
• One Engine Operator's Manual
Assembly
NOTICE:
This unit is shipped without gasoline or oil in
the engine. Fill up with gasoline and oil as instructed in the
accompanying engine manual BEFORE operating your pressure
washer.
NOTE: The pump on this unit is maintenance free and requires
no oil. If there is a problem with the pump, a Customer Support
Representative at (800) 965-4CUB as soon as possible.
Handle
1. Place handle onto frame , depress the snap buttons,
and slide the handle assembly onto the frame until snap
buttons snap into place. See Figure 3-1.
NOTICE:
Risk of personal injury. Avoid placing hands between
handle and frame when assembling to prevent pinching.
Figure 3-1
• One Handle
• One High Pressure Hose
• One Quick-Connect Spray Wand
Nozzles
1. Remove the colored quick-connect nozzles from the plastic
bag and insert them into correct grommet on the nozzle
holder. Nozzles are color coded to match colored nozzles
on label. See Figure 3-2.
Wand to Gun
1. Connect wand to gun. Tighten securely. See Figure 3-3.
• One Spray Gun
• Four Quick-Connect Nozzles
• One Bottle of Oil
Figure 3-2
Figure 3-3
3
9