Cub Cadet CC 3024H Manuel page 10

Hose to Gun
1. Attach high pressure hose to gun. Tighten se cure ly. See
Figure 3-4.
Spray Gun Holster Installation
1. Mount the gun holster to the upright frame tube using
the saddle bolt and knob provided. See Figure 3-5.
Spray Gun
10 S 3 — A
ection SSembly
Figure 3-4
Holster
Figure 3-5
& S -U
et p
Set-Up
Gas and Oil Fill-Up
Refer to the separate engine owner's manual for additional
engine information.
1. Add oil provided before starting unit for the first time out
of the box.
2. Service the engine with gasoline as instructed in the
separate engine owner's manual.
WARNING:
Use extreme care when handling
gasoline. Gasoline is extremely flammable and the
vapors are explosive. Never fuel the machine
indoors or while the engine is hot or running.
Extinguish cigarettes, cigars, pipes and other
sources of ignition.