Bosch Truvo Notice Originale page 17

If there are gas pipes in the building, check to ensure that none of
u
them have been damaged after completing any work on walls, ceil-
ings or floors.
Live wires can be detected more easily when power consumers (e.g.
u
lamps, appliances) are connected to the wire being sought and switched
on. Switch off power consumers and make sure that live cables are
de-energised before drilling, sawing or milling into walls, ceilings or
floors. After performing any kind of work, check to ensure that ob-
jects placed on the base material are not live.
When attaching objects to dry walls, and in particular when attaching
u
them to the substructure, check to ensure that both the wall and the
fastening materials have a sufficient load-bearing capacity.
Product Description and Specifications
Please observe the illustrations at the beginning of this operating manual.
Intended Use
The measuring tool is intended for the detection of metal (ferrous and non-
ferrous metals, e.g. reinforcing steel) and live wires in walls, ceilings and
floors.
The measuring tool is suitable for indoor use.
Product features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
(1) Gripping surface
(2) On/off switch
(3) Indicator light
(4) Left-hand and right-hand marking aids
(5) Top marking aid
(6) Sensor area
(7) Serial number
(8) Battery compartment cover
(9) Battery compartment cover locking mechanism
Bosch Power Tools
English | 17
1 609 92A 6H5 | (30.06.2021)