Techno Line WS9132 Mode D'emploi page 24

RF Transmission Procedure:
The weather station automatically starts receiving transmission from outdoor thermo
sensor after batteries inserted.
The remote sensor will automatically transmit temperature signal to the Weather Station
after batteries inserted.
If the Weather Station failed to receive transmission from outdoor sensor ("- -.-"display on
the LCD), press and hold the "-/CH" button for 3 seconds to receive transmission
manually. RF icon "
remote sensor.
If the weather station is used with 2 or 3 transmitters, press "-/CH" button shortly to
display CH2, CH3 or cyclic display.
Maximum/minimum temperature/humidity
Press "MEM" button once, the LCD will display maximum value of temperature/ humidity.
If the "MEM" button is pressed again the minimum value is displayed.
While displaying MAX or MIN values, there is "MAX" or "MIN" on the LCD.
" flashes on the LCD of the Weather Station to receive the
Press „-/CH" button
P re ss "+ /C H "
P re ss "+ /C H "
Press „-/CH"
A u to m a ti c
5 S
A u to m a ti c
EN10
P re ss "+ /C H "
Press „-/CH"
5 S
A u to m a ti c
P re ss "+ /C H "
Press „-/CH"