Table des Matières
Publicité
DESCRIPTION OF HOOD
1. Control panel.
a. Light switch.
b. Extraction and minimum extraction speed ON/OFF switch.
c. Medium extraction speed switch.
d. Maximum extraction speed switch.
2. Grease filter
3. Grease filter release handle
4. Halogen bulb
5. Steam deflector
6. Telescopic flue
7. Air outlet (for filter version only)
Grease filters:
Metal grease filters have an unlimited life and should be washed once a month either by hand or in
a dishwasher at a low temperature and with a short cycle.
Washing in a dishwasher can cause grease filters to turn white, but this in no way affects efficiency.
a. press the handle to remove the filter
b. remove it.
Wash the filter and leave it to dry, proceeding in reverse order to refit it.
Halogen lamps:
Use a small screwdriver or other suitable tool to prise off the cover. Refit (snap on).
Only use 20 W max. (12V-G4) halogen lamps, taking care not to touch them with hands.
Active carbon filter (filter hoods only):
The carbon filter must be washed once a month in a dishwasher at the highest temperature, using a
normal dishwasher detergent. Wash the filters on their own.
After washing, reactivate the carbon filter by drying it in the oven at 100° C for 10 minutes.
Change the carbon filter every 3 years.
Fitting the carbon filter:
1. Remove the grease filter.
2. Remove the filter holder by turning the knobs through 90°
3. Fit the carbon filter "i" inside the filter holder "h".
Reverse the above procedure to re-fit the filter holder and grease filter.
GB4
Publicité
Table des Matières
