Ryobi RYRM8003 Manuel D'utilisation page 14

ADJUSTING THE SEAT
See Figure 4.
Adjust the seat position forward or backward to ensure you
are able to make firm contact with the brake pedal before
operating the mower. The seat suspension knob allows the
adjustment of a softer or firmer ride.
To move the seat forward or backward:
 Turn the key to the OFF position and set the parking brake.
 Sit down on seat and lift the seat adjustment bar.
 While lifting up the bar, slide the seat to the desired
position.
 Release the bar and make sure the seat is locked in posi-
tion before operating the mower.
To adjust the seat suspension:
 Turn the key to the OFF position and set the parking brake.
 Sit down on seat and while holding the suspension knob,
rotate it to adjust the seat for a softer to firmer setting.
WARNING:
Be sure the seat is locked into place before operating the
mower. A seat that is not secure can cause the operator
to shift and lose control of the mower and result in pos-
sible death or serious personal injury.
ADJUSTING THE ARMREST
See Figure 5.
Both armrests adjust up and down for the most comfort-
able operating height. The left armrest adjusts forward and
backward.
To move the armrests up and down:
 Turn the key to the OFF position and set the parking brake.
 Remove the two bolts as shown.
 Raise or lower the armrest to the desired height making
sure both bolt holes are still in alignment with the holes
in the seat frame.
 Reinstall bolts and tighten securely.
To move the left armrest forward or backward:
 Turn the key to the OFF position and set the parking brake.
 Loosen the knob and adjust the armrest to the desired
position.
 Tighten the knob firmly to secure the armrest in place.
WARNING:
Be sure the armrests are locked into place before operat-
ing the mower. An armrest that is not secure can cause
the operator to shift and lose control of the mower and
result in possible death or serious personal injury.
OPERATION
SEAT SUSPENSION KNOB
ARMREST
ARMREST
14 — English
SEAT ADJUSTMENT BAR
BOLT
SEAT
KNOB
Fig. 4
SEAT
SEAT
FRAME
Fig. 5