Setting The Fm Frequency Manually; Saving / Calling Up Favourite Stations; Fm Menu; Wireless Music Streaming - Albrecht Audio DR 865 Senior Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10.3. Setting the FM frequency manually

Use the ▲/▼ buttons on the remote control to change the FM frequency in 0.05 MHz increments.
Press and hold down one of the arrow buttons to automatically search for the next available station.
Alternatively, you can also use the radio to directly control the station search. Briefl y press the
SCAN/TUNE rotary knob. The search process stops automatically at the next available station.
For manual frequency setting, turn the radio SCAN/TUNE rotary knob to change the FM frequency
in 0.05 MHz increments.

10.4. Saving / calling up favourite stations

FM stations can also be saved as favourites and quickly called up again. The operation procedure
is the same as for DAB transmitters, see "Saving / recalling favourite stations" on page 19. DAB+
and FM stations can be stored together in the favourites.

10.5. FM menu

In FM mode, press the MENU button or press and hold down the
button on the remote control
to call up the FM menu. In this menu you can view the station list or initiate a new station search.
Use the "Search sensitivity" menu item to set whether only strong or all recognised stations should
be included in the station search. The "Audio settings" menu item determines whether stereo
transmitters should be used or whether playback should be limited to mono transmitters. The main
menu can also be called up directly from this menu.

11. Wireless music streaming

A Bluetooth-enabled mobile phone can be used for wireless playback of any audio content. For this
purpose, you need to activate the "Bluetooth" mode via the main menu. Once this is done, select the
ALBRECHT DR 865 device on your mobile phone. For more details about operation of your mobile
phone, please refer to the device manual.

12. AUX IN

This mode is used for wired playback of audio content. To do this, connect an audio device to the
AUX IN connection on the back of the device using a 3.5 mm audio jack cable.
20

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

27865

Table des Matières