Head Cleaning
How to Clean
26
Part 4. Care and Maintenance
To keep the AIT drive in top condition, clean the head as needed using a head
cleaning cartridge with the AIT logo (sold separately). When the head needs
cleaning, the CLEANING REQUEST indicator lights.
1
Load the head cleaning cartridge (SDX1-CL) into the AIT drive.
Cleaning starts automatically.
2
After about 15 seconds, cleaning will stop and the cartridge will be
ejected automatically.
Notice
Do not rewind the cleaning cartridge and reuse it. When you reach the end of
the cartridge, dispose it and buy a new cleaning cartridge with the AIT logo.