Benassi BL355 Manuel D'utilisation page 27

If you must change area of work, it is counselled to loosen the lever of clutch to allow the
rotors stop, in order to do the displacement in all security.
Ever the operator will have to walk backwards, must have double caution to not stumble or
fall.
4.2.3 Stop
•
Slow down the engine to the minimum speed, putting the lever of
accelerator in "stop" position.
•
Put the switch in "OFF" position (pic.8).
•
Close the strainer of the fuel tank (pic.9)
Accidents that can happen:
•
If the transmission belt or the clutch cable breaks, the rotors stop immediately.
•
If the accelerator cable brake, the engine will be stopped in the switch.
If any component is either damaged broken, it is necessary to replace it immediately so
that machine recovers its performances of origin and can function in all security.
Immediately contact your dealer so that it conducts the replacement of the damaged
components.
27
BL355 BL360
Picture 8
Picture 9